News Archieven - Wigersma & Sikkema

7 February 2024ByBrent TeijssenInNews

Significant reduction in noise emissions after installation of silencer in RS350S DN80 PN16 gas pressure regulators

Noise emission is becoming an increasingly important criterion when selecting gas pressure regulators for installation in residential areas. This aspect is often specified in regulations, as for example in the TA-Lärm in Germany. See: www.verwaltungsvorschriften-im-internet.de/bsvwvbund_26081998_IG19980826.htm A test recently carried out by Wigersma & Sikkema at ZVO Energie GmbH in Sierksdorf, Germany, addresses this important aspect....

5 February 2024ByBrent TeijssenInNews

Successful endurance test with 100% hydrogen of PLEXOR system couplings at GVG Rhein-Erft

Introduction: In Niederberg in North Rhine-Westphalia, GVG Rhein-Erft used hydrogen to supply heat for the first time. 20 per cent has been fed into the gas grid in the Erftstadt district since October 2022. The H2-MiX pilot project is an important step towards a climate-neutral heat supply. GVG Rhein-Erft GmbH and Rheinische NETZGesellschaft mbH (RNG)...

27 October 2023ByAdmin UserInNews

New temperature sensor UNIGAS 300

In our UNIGAS 300, a 5.8 mm PT500 temperature sensor is used to measure the temperature. These sensors have proven to be very accurate. In combination with UNIGAS 300, an accuracy of <0.1% is achieved for the temperature range from -40° to +55°C. We have made a number of improvements to the temperature sensor: The...

10 July 2023ByAdmin UserInNews

Introducing the 4-20mA module

We are excited to introduce our latest innovation, the 4-20mA module, developed entirely in-house at Wigersma & Sikkema. Both the hardware and software have been meticulously crafted by our own dedicated team of experts. This module represents a significant milestone for us as it is the first product based upon our own new “embedded framework”...

25 August 2022ByAdmin UserInNews

The RS350S gas pressure regulator extensively tested for accuracy, response time, and inlet pressure sensitivity

Wigersma & Sikkema RS350S Gas pressure regulator At the request of Wigersma & Sikkema B.V., Qirion Energy Consulting (EC) conducted a series of functional tests on our RS350S DN 50 PN16 gas pressure regulator on 16 and 17 March 2022. Qirion EC is a technical consultancy firm in the field of energy. The tests were...

21 June 2022ByAdmin UserInNews

Wigersma & Sikkema organizes 3rd bi-annual PLEXOR distributor meeting

On June 13, 14, and 15 the third bi-annual PLEXOR distributor meeting was organized at Wigersma & Sikkema in Doesburg. The meeting was originally planned to be held in 2021, but due to Covid-19, it was postponed to this year. Participants came from Croatia, Lithuania, Poland, Bulgaria, and Switzerland. The program consisted of a technical...

23 May 2022ByAdmin UserInNews

RS350S gas pressure regulator now also available with adapters!

We have now added adapters to the delivery programme of the RS350S gas pressure regulator. With these adapters it is possible to easily replace other (old) regulators with a different inlet and outlet side (e.g. RMG 402 and 408) with the RS350S. Here are some possibilities (other lengths or sizes are available on request): As...

9 November 2021ByW&SInNews

Eniwa AG and Wigersma & Sikkema cooperate on sales and support of the RS350S gas pressure regulator in Switzerland

Optimal service and product support are very important for Wigersma & Sikkema. With Eniwa AG, a competent local partner has been found for sales, training and service of the RS350S gas pressure regulator in Switzerland. Eniwa AG in Buchs is the energy and water supplier in the Aarau region and supplies 25 communities with natural...

9 November 2021ByW&SInNews

Wuhan Shengsaisi Gas Measurement and Control System Co., Ltd. participates at the 2021 China Gas Exhibition.

On October 24-29, the 2021 China Gas Exhibition was held in Hangzhou, Zhejiang. Our Chinese distributor Wuhan Shengsaisi Gas Measurement and Control Systems Co, Ltd. participated with a large booth, displaying the PLEXOR Inspection system and the RS350S PN16 DN50 gas pressure regulator. A demonstration gas control line was available on the booth which allowed...

29 April 2021ByAdmin UserInNews

Regular gas pressure regulating station with RS350S regulator passes practical test with 100% hydrogen without any problems.

Hydrogen can become an important link in the energy supply of the future. Green hydrogen is a sustainable option as raw material and energy carrier. If we can also use the existing infrastructure for natural gas to transport and store hydrogen, this could yield enormous benefits. On 22 and 23 October, KIWA (a renown Dutch...

1 2 3 … 5

Category